A handheld fiber laser marking machine is a laser device used to mark various materials. Compact and portable, it can be operated by hand and is suitable for marking large mechanical parts. So, do you know how to correctly operate a handheld fiber laser marking machine? Below, I will briefly introduce its basic operating methods.
1.Powering On:
Before powering on, ensure that the power cable of the handheld fiber laser marking machine is correctly and securely connected. Turn on the main power (the power indicator will light up), and confirm that the emergency stop switch is in the pressed state. Depending on the characteristics of different models, it may be necessary to unlock specific safety mechanisms (such as a knob) to activate the laser head power.
2.Adjusting Parameter Settings:
After opening the dedicated laser marking software for the handheld fiber laser marking machine, you can select a pen number or customize a new one. Manually adjust parameters such as speed, power, and frequency based on the material and hardness of the item to be marked. After adjustment, perform distance calibration to ensure the standard distance between the item and the laser head. This can be achieved by adjusting the worktable or height control device for positioning.
3.Marking Operation:
Open the pre-prepared graphic data in the dedicated software of the handheld fiber laser marking machine, enable the red light preview function, and fine-tune the item's position to align the actual marking point with the displayed one. Start marking using the software's shortcut keys or hardware controller, and observe the process closely. If any issues arise, pause and make adjustments before continuing. After the first marking is completed, check whether the marking effect meets the standards. If problems occur, adjust the parameters until the requirements are met. Once the test is successful, save the settings for batch marking.
4.Shutdown And Maintenance:
After marking is completed, press the emergency stop switch, cut off the laser head power, and ensure the industrial computer is not running before shutting down normally. To ensure the daily operation of the machine, regular maintenance of the hand helding fiber Laser marking machine 80W is required. Regularly clean the surface dust of the hand helding fiber laser marking machine 80W, and carefully inspect the areas around the heat dissipation holes to prevent overheating caused by dust accumulation. When storing, place it in a dry and ventilated area, away from corrosive gases. If it will not be used for an extended period, it is recommended to cover it with a dust cover.
The above outlines the correct operating procedures for the handheld fiber laser marking machine. While the operation is simple, each step is crucial to ensure the normal functioning of the equipment and the quality of the markings. Regular maintenance and cleaning can help identify potential issues in a timely manner and extend the lifespan of the device. If you are interested in the handheld fiber laser marking machine please feel free to contact us.
Note: These data are for reference only. The actual cutting results may vary depending on equipment performance, operational skills, and the specific characteristics of the material.