During operation, attention must be paid to maintenance, and regular maintenance and care can increase the service life of the equipment, save costs, and create greater benefits. The following are precautions for using laser cleaning machine.
In today's advocacy of environmental protection, laser cleaning machineis non-contact, have no thermal effect, and will not have mechanical force on the surface of the cleaning object. It is widely used in industry, so what precautions should be taken when using laser cleaning machine?
1. Follow the machine's power on and off sequence: when turning on the machine, turn on the water pump (water cooler) first, then turn on the power switch, and then turn on the laser switch. When shutting down, turn off the laser switch first, then turn off the power switch, and then turn off the water pump (water cooler).
2. Clean the laser machine chiller once every half a month, drain the dirty water in the machine, and then fill it with new pure water (dirty water will affect the light effect).
3. It is required to clean regularly and quantitatively every day, remove debris on the table, limiter and guide rail, and spray lubricating oil on the guide rail;
4. The reflector and focusing lens should be scrubbed with special cleaning fluid every 6-8 hours. When scrubbing, use a cotton swab or cotton swab dipped in cleaning fluid to scrub from the center of the focusing lens to the edge in a counterclockwise direction, and be careful to prevent scratching the lens.
5. Cleaning method of exhaust fan and smoke pipe: When there is a lot of smoke and dust during the laser cleaning machine processing, it is necessary to clean the fan, remove the fan cover, use thin wood chips to scrape the dust on the fan blades and wind channel, and then use a high-pressure gun to blow away the dust. The method of cleaning the smoke pipe is the same as the water cleaning method of the exhaust fan.
During the operation of the laser cleaning machine, a large amount of corrosive dust and smoke will be generated during the processing of the workpiece. These smoke and dust will be deposited on the surface of the guide rail and linear axis for a long time, which will have a great impact on the processing accuracy of the laser cleaning machine, and will form corrosion points on the surface of the guide rail and linear axis, shortening the service life of the equipment. In order to ensure the normal and stable operation of the machine and the processing quality of the product, the daily maintenance of the guide rails and linear axes should be done carefully.
Okay! The above is what we share today. In the past, we have also shared a lot of knowledge about laser equipment, such as: "Five common faults and solutions of laser marking machines" and "What components does the fiber laser continuous platform welding machine consist of?" If there is an article that interests you, you can click the jump link to read it.