Portable fiber laser marking machine it is unanimously considered to be a new generation of products that may fully replace solid-state lasers. Portable fiber laser marking machine it is the use of laser beams to permanently mark the surfaces of various substances. The marking effect is to expose the deep material through the evaporation of the surface material, or to engrave traces through the physical changes of the surface material caused by light energy, or to burn part of the material through light energy, showing the patterns, texts, barcodes and other graphics that need to be etched.
1.Analysis of common problems：
1) The laser of the portable fiber laser marking machine has no output or low output power.
2) The marking header of the portable fiber laser marking machine fails, and the marking header cannot be moved normally or the movement is inaccurate.
3) The processing software of the portable fiber laser marking machine fails, the marking software cannot run normally, the setting parameters are invalid, and the marking content is incorrect.
4) The portable fiber laser marking machine will have a cooling system failure, the cooling water pump will not work properly, and the water temperature will be too high.
5) The optical path adjustment of the portable fiber laser marking machine fails, and the marked pattern is blurred or distorted.
2.Solution：
1) The optical path of the laser, the quality of the laser beam, and the cooling system should be checked for normal operation.
2) Check whether the drive circuit, sensor, and motor of the marking head motor need to be replaced.
3) You need to reinstall the marking software, check the setting parameters, and check whether the tool path is correct.
4) Check whether the cooling water pump power supply is normal, clean the cooling water circuit, and replace the cooling water.
5) It is necessary to adjust the optical axis of the laser and the marking head, and check whether the lens needs to be cleaned or replaced.
3. Portable fiber laser marking machine：
What problems can be solved：
1.Fiber laser marking machine most metal materials (such as stainless steel, aluminum, copper, iron, etc.) can be marked.
2. Fiber laser marking machine it also contains some non-metallic materials: plastics, ceramics, rubber, etc.
3. The small fiber laser engraving machine can complete the marking of serial numbers, barcodes, QR codes, graphic LOGOS, characters and other information.
Our products have high electro-optical conversion rate, high anti-reverse ability, customized output fiber length, and high beam quality. Our products can solve all the above problems. And we understand that customers may have different needs for laser equipment, so we provide customers with efficient and professional pre-sales support. And according to customer needs, our technical team will provide you with professional selection suggestions. If you encounter any problems during the use of the equipment, you can also contact our after-sales team at any time.
As a portable fiber laser marking machine manufacturer, we focus on the design and production of professional laser equipment such as laser cutting, marking, welding, rust removal, and barrier removal. We have the technical advantages of high electro-optical conversion rate, high anti-reverse ability, customized output fiber length, and high beam quality. We have won the trust and praise of the majority of users at home and abroad.