Fiber laser marking machine is widely used in industrial production in various industries. However, not all environments are suitable for the use of fiber laser marking machine. If the use environment is not appropriate, it may affect the performance of the equipment and even shorten the life of the equipment. So, what occasions are not suitable for the use of laser marking machines?
The following environments should not use laser marking machines:
1. Unstable voltage environment:
Fiber laser marking machine has high requirements for power supply. If the voltage fluctuates greatly, it is easy to cause equipment damage or abnormal operation. Therefore, in an unstable voltage environment, it is recommended to equip the device with a voltage stabilizer to enable the normal operation of the device.
2. Strong acid and strong alkali environment:
The core components of the fiber laser marking machine are highly precise, and strong acid and strong alkali environments may corrode important components such as optical lenses and circuit boards, affecting the life of the equipment. Therefore, try to avoid long-term use of the fiber laser marking machine in a chemically corrosive environment.
3. Environments close to strong electric and strong magnetic equipment:
Strong electric and strong magnetic equipment may interfere with the signal transmission of the fiber laser marking machine, causing abnormal operation and affecting the marking accuracy. When using a laser marking machine, stay away from large motors, transformers, high-frequency equipment, etc.
4. Environment for using two-core power supply:
Fiber laser marking machine usually requires a three-core power supply (with ground wire) for safe operation. If a two-core power supply is used, it May cause leakage, damage or electromagnetic interference of the equipment, affecting the marking effect.
Precautions for operating fiber laser marking machine:
1. Avoid direct contact with the laser:
During the laser marking process, never put your hands under the laser beam to prevent burns. When operating, it is recommended to wear protective glasses to avoid direct laser exposure to the eyes.
2. Test engraving before formal marking:
Before formal marking, test engraving with samples to determine the parameters to be set to avoid damage to the product or waste of materials. Especially when engraving the code, check carefully.
3. Turn on and off the machine correctly to avoid sudden power outages:
The power on and off sequence of the laser marking machine should be strictly followed: "turn on the power, start the equipment, work, turn off the equipment, and power off". Avoid sudden power outages to prevent equipment damage.
4. Check the laser head before turning on the equipment:
Before turning on the machine, the protective cover of the laser head should be removed, and there should be no flammable or easily damaged items under the laser head to prevent accidents when the laser is started.
5. Perform equipment maintenance after use:
After each use, the computer and laser marking machine should be turned off, and the laser marking machine should be protected with a dust cover. At the same time, regularly clean the optical lens and dust inside the equipment, so that it can maintain a good operating state.
Daily maintenance makes the laser marking machine more durable:
In order to ensure the stable operation of the laser marking machine, it is recommended to regularly check the equipment optical path, clean the lens, check the cooling system, and pay attention to the cleanliness of the working environment. Although the laser marking machine is powerful, it is not suitable for any environment. A reasonable use environment and standardized operation methods can ensure the long-term and stable operation of the equipment. I hope the above content will help you and make your laser marking machine use smoother!
Note: The above content and data are for reference only. Since the specific performance and parameters of each device are different, please make the correct judgment based on your own device!