Product News

​Portable fiber laser marking machine it is unanimously considered to be a new generation of products that may fully replace solid-state lasers. Portable fiber laser marking machine it is the use of laser beams to permanently mark the surfaces of various substances. The marking effect is to expose the deep material through the evaporation of the surface material, or to engrave traces through the physical changes of the surface material caused by light energy, or to burn part of the material through light energy, showing the patterns, texts, barcodes and other graphics that need to be etched.

Portable fiber laser marking machine is loved by customers for its friendly operation interface, easy to use, fast marking speed, high efficiency, delicate marking effect, clear, durable and other excellent performance in a working environment with limited space. However, in the actual operation process, operators often face some problems, resulting in reduced efficiency and even affecting production progress. In order to reduce the number of failures of portable fiber laser marking machine and improve work efficiency, as a portable fiber laser marking machine manufacturer, this article will explain to you three common problems and solutions in the use of fiber laser marking machine.

Note: The maintenance of the portable fiber laser welding machine must be carried out by specially trained personnel, otherwise it is easy to cause serious man-made damage. 1. In order to ensure that the laser of the portable fiber laser welding machine is always in normal working condition, after two weeks of continuous work or when it is stopped for a period of time, the components in the optical path such as the YAG rod, dielectric diaphragm and lens protection glass should be checked before starting the machine to ensure that the optical components are free of dust pollution, mildew and other abnormal phenomena. If there are any abnormal phenomena, they should be handled in time to ensure that the optical components will not be damaged under strong laser irradiation. (If the use environment of the portable fiber laser welding machine is relatively clean, the above inspection can be extended to one month or even longer).

​18. Is this technology suitable for historic preservation/restoration? Yes, but it all depends on the material and contaminants/coatings of the substrate. Our fiber laser rust removal machines have been used for historic preservation and restoration. 19. What is the smoke produced by the fiber laser rust removal machine? Where are the smoke particles? Anything on the surface may be present in the air. Smoke particles with handheld and mechanical automated cleaning lasers are either filtered in the built-in optics or absorbed with a separate channel.

1.Can fiber laser rust removal machine strip paint from brick or wood? Usually not. Materials such as brick are porous substrates, and laser cleaning is not ideal for such materials. Wood is a combustible material and will burn under sufficient laser exposure. 2.Can fiber laser rust removal machine clean pipes? Laser cleaning solutions are best suited for smaller target areas. Although we have some unique solutions that can clean certain inner diameters, we do not think it will work well for long pipes due to many technical and equipment limitations in the process. The best areas for laser cleaning are discoverable areas, such as areas visible to the naked eye.

In order to help more customers, operators and partners to deeply understand the details and operating skills of laser cutting, we have combined years of practical experience to compile a set of "pit avoidance guides".

In the past 3 months, we have received many customers' questions about the comparison between laser welding and traditional welding. Perhaps you have the same question. Is laser welding really a "more advanced" choice? Today we use 3 customer on-site cases to make a real comparison. Is it suitable for your production line?

The problem of stainless steel turning black, yellowing, and bluing after welding has always troubled many sheet metal welding industries. From kitchenware to medical equipment to elevator door panels, customers have higher and higher requirements for the consistency of weld color. Many customers often ask us: "Why does fiber laser welding also turn black? Can it really be solved?"

When we use the hand held fiber laser welding machine, we must not forget to regularly maintain the equipment, because the parts of the equipment will inevitably wear out during long-term use. Only regular maintenance can keep the equipment in the most stable working state. So what we need to understand is how to maintain the hand held fiber laser welding machine? Many people don't understand it, and you will understand it after reading the following content!