News

Laser cutting is a critically important application within the field of laser processing technology. Thanks to declining laser component costs and the maturation of the technology itself, laser cutting machines have become top sellers today, accounting for over 30% of the total market share for laser processing equipment nationwide.

I. Pre-Startup Preparations 1. Environmental Inspection: Verify that the working environment temperature is between 5°C and 40°C, and that the humidity does not exceed 80%. This prevents damage to internal electronic components or degradation of optical path performance caused by unsuitable environmental temperature and humidity levels.

For businesses, a laser cutting machine is not only a production tool but also a guarantee of efficiency and product quality. To ensure stable operation, the equipment alone is not enough; a complete set of scientific and executable operating procedures is needed to support it.

​Laser cutting machines are becoming increasingly widely used in the industrial sector. Based on their high-temperature principle, they are used to process the surface of materials, which are fed into the machine to meet customer needs. However, some people don't know how to adjust the optical path when using a laser machine. Below, we will introduce the method for adjusting the optical path of a laser cutting machine.

Maximizing the ROI of a laser cutting machine​ requires more than just operational skill; it demands a rigorous commitment to maintenance and safety. Below are five expert-level tips to ensure machine longevity and precision.

Among all core components of a laser cutting machine, the cutting head can be considered a true “workhorse.” Without timely and proper maintenance, it may not only reduce cutting quality, but also lead to unexpected downtime and even high repair costs. To help extend the service life of the cutting head and keep it operating at optimal performance, we have prepared a practical Laser Cutting Head Maintenance Guide for daily use.

Introduction During long-term operation, many components of a large laser cutting machine will inevitably experience wear and tear, especially commonly used accessories. If these parts are not replaced in time, it may affect normal machine operation, delay production schedules, and even cause damage to the equipment itself. To ensure stable and continuous production, factories and enterprises usually prepare sufficient stocks of common accessories in advance. This article introduces several high-frequency accessories used in a large laser cutting machine, helping users better manage equipment maintenance and reduce downtime risks.

As a high-precision processing equipment, small scale fiber laser cutting machine improves production efficiency while operating safety is the core prerequisite. Standardized compliance with safety regulations can not only ensure the personal safety of operators, but also extend the life of equipment and reduce failures. The following combs the main points of safe operation of small scale fiber laser cutting machine from the three key links before, during operation, and after shutdown.

In the field of laser processing, “does the small scale fiber laser cutting machine need gas” is the core question often asked by users. In fact, the operation of fiber laser marking machines is inseparable from auxiliary gases-oxygen, nitrogen or air can not only protect the cutting head and improve accuracy, but also remove slag. For example, oxygen is suitable for carbon steel cutting, and nitrogen is more suitable for high-precision stainless steel processing. However, in the field of marking, the gas requirements of small scale fiber laser cutting machine are very different, and Eagle laser, as a professional brand of laser equipment, our fiber laser cutter for metal takes this advantage to the extreme.

In the field of metal processing, laser cutting machines are fast and good, and have become an essential tool for many factories. However, in the face of steel plates of different thicknesses, how to choose? Do you choose a fiber laser cutting machine or a CO2 laser cutting machine?How much power is it?